Loaddisk752

Behringer Eurorack MX1604A Mixer

• 2Outputs
  • 2.2¼ Inch Tip-Sleeve (unbalanced) to ¼ Inch Tip-Sleeve (unbalanced)

Summary

Simplest thing that could possibly work.

Use the ¼ inch phone jack (Tip-Sleeve) outputs to

• the PS1 Powerstand, Channels 1 or 2 if you want to use the presets and the Tone and Level Controls on the R1 Remote

OR

• the PS1 Powerstand, Channels 3 or 4 if you prefer to leave Channels 1 and 2 open for other inputs.

OR You can use the XLR Balanced outputs.

View and Download Behringer MX1604A user manual online. Behringer Eurorack MX1604A Mixers: User Guide. MX1604A Mixer pdf manual download. The first four channels of the MX1. A wide range of gain is available, from - 1. B, and the common - 1. Bu positions are clearly marked. EURORACK fi MX1604A www.behringer.com Version 1.1 May 2000 Technical Specifications ENGLISH. 2 EURORACK MX1604A Ultra-Low Noise 12 Channel, 4-Bus Mic/Line Mixer.

Outputs

If the Mixer has a button, switch or adjustment that allows you to attenuate (turn down) the output of the balanced XLR main outs, try the setting with the lower output.

Here is an example (Mackie 1402 VLZ)

Otherwise you may need to use a Pad for each output channel.

¼ Inch with suitable output

for PS1 Powerstand Channel 1 or 2 inputs

You can use TS (Tip Sleeve) unbalanced cables, or TRS (Tip Ring Sleeve) balanced cables, but since the ¼ inch phone connections at the Bose Classic and Model I Power Stand are unbalanced there is no particular benefit using balanced cables.

¼ Inch Tip-Sleeve (unbalanced) to ¼ Inch Tip-Sleeve (unbalanced)

This should work fine.

¼ Inch Tip-Ring-Sleeve (balanced) to ¼ Inch Tip-Sleeve (unbalanced)

This should work fine.

¼ Inch Tip-Ring-Sleeve (balanced) to ¼ Inch Tip-Ring-Sleeve (balanced)

This should also work, but likely no better than a simple ¼ Inch Tip-Sleeve to Tip-Sleeve cable. This is because the ¼ Inch input on the Bose System is Tip-Sleeve (unbalanced) anyway.

Links:

• Manual alternate location Manual

If want to use the balanced outputs (red) set the button (50) or use ¼ Inch Main Outputs (green)

Behringer Eurorack Mx1604a Manual Diagram

More Notes

Behringer Eurorack MX1604A Mixer

• 2Outputs
  • 2.2¼ Inch Tip-Sleeve (unbalanced) to ¼ Inch Tip-Sleeve (unbalanced)

Summary

Simplest thing that could possibly work.

Use the ¼ inch phone jack (Tip-Sleeve) outputs to

• the PS1 Powerstand, Channels 1 or 2 if you want to use the presets and the Tone and Level Controls on the R1 Remote

OR

Behringer Eurorack Mx1604a Manual Software

• the PS1 Powerstand, Channels 3 or 4 if you prefer to leave Channels 1 and 2 open for other inputs.

OR You can use the XLR Balanced outputs.

Outputs

If the Mixer has a button, switch or adjustment that allows you to attenuate (turn down) the output of the balanced XLR main outs, try the setting with the lower output.

Here is an example (Mackie 1402 VLZ)

Otherwise you may need to use a Pad for each output channel.

¼ Inch with suitable output

for PS1 Powerstand Channel 1 or 2 inputs

You can use TS (Tip Sleeve) unbalanced cables, or TRS (Tip Ring Sleeve) balanced cables, but since the ¼ inch phone connections at the Bose Classic and Model I Power Stand are unbalanced there is no particular benefit using balanced cables.

Behringer Eurorack Mx1604a Mixer Power Supply

¼ Inch Tip-Sleeve (unbalanced) to ¼ Inch Tip-Sleeve (unbalanced)

This should work fine.

¼ Inch Tip-Ring-Sleeve (balanced) to ¼ Inch Tip-Sleeve (unbalanced)

This should work fine.

¼ Inch Tip-Ring-Sleeve (balanced) to ¼ Inch Tip-Ring-Sleeve (balanced)

This should also work, but likely no better than a simple ¼ Inch Tip-Sleeve to Tip-Sleeve cable. This is because the ¼ Inch input on the Bose System is Tip-Sleeve (unbalanced) anyway.

Links:

• Manual alternate location Manual

If want to use the balanced outputs (red) set the button (50) or use ¼ Inch Main Outputs (green)

More Notes